Dust Extraction
Why is my dust extractor constantly beeping?
The beeping on your Festool Dust Extractor could be caused of the hose, tub or filter, to troublesho
Why is the bottom LED on my Festool CT MIDI showing red?
The bottom LED illuminates red when the inbuilt circuit breaker has tripped to protect the extractor
Why is the warning signal on my M Class Dust Extractor beeping?
The M Class Dust Extractors have a mandatory warning signal (beeper) installed. The beeper is to al
Can a Festool Dust Extractor be used with other tool brands?
Festool Dust Extractors work most effectively with Festool branded tools, however they do work with
My Festool Vacuum seems to have less suction than it did before.
A full dust bag, blocked hose or clogged filter can reduce the suction. Therefore empty the dust bag
Are the CTM Midi and the CT-VA Cyclone Pre Separator designed to be compatiable?
Yes, the two items are compatible however there are some settings to aware of:
The separator has a t
I have a Festool Dust Extractor. It seems as if the dust is somehow bypassing the filter bag and clogging the main filter. I cannot figure out why.
There are two stages of filtration in our dust extractors:
The filter bag The filter itself
The f
My mains powered dust extractor stopped working when I was using a tool..What do I do?
Check the circuit breaker did not trip by pressing the reset button above the power socket or press
What class dust extractor do I use for concrete and fibre cement?
Festool dust extractors are Number 1 for hazardous dust. For concrete and fibre cement the M class e
What are the details of the replacement hose garage for older models of CT Mini and Midi?
Please see this document shows which parts are needed when you want to replace a hose garage on the
Can a Festool hose fit other brand dust extractors?
Festool hoses will fit other manufacturer's vacs that have a 57mm (2-1/4") I.D. hose port.
Can Festool Dust Extratctors be used with other mnufacturers powertools?
As the sleeves for individual machines from other manufacturers vary in size and shape, it is not po
Which sanders can be used without Dust Extraction and which ones need dust extraction?
It is always advisable to use some form of dust extraction when sanding.Sanding, on most surfaces, c
How do I join two 36mm hoses?
To join two 36mm hoses, first remove the tool end adapter on one hose and replace with another vacuu
What is the difference between L and M class dust extractors?
The 'M' Class dust extractor has an audible flow alarm (beeper) to alert you that the air fl
What are the different dust classes?
Dust that is produced while working is divided into three classes.This process specifies the extract
My older Festool tool has an oval dust port, and a round ridged dust port. I cant see how the new vacuum hoses with locking tabs work.
The 27mm anti-static hoses will connect to both the oval and ridged dust ports, there is no adapter
Is it possible to change the filter of a CTM midi to a Hepa filter
Yes, it is possible, you can purchase the 204201 Main filter however the M Class filter part no. 20
WHY ARE SOME DUST EXTRACTORS CONSIDERED HEPA DUST EXTRACTORS?
HEPA vacuums are specially designed to perform using HEPA filters and bags. Although you can often
What hoses can I join together without a hose connector?
A 27mm hose can be joined without a connector and plugged into the opposite end of another 27mm hose
How far can silica dust travel?
“Silica dust less than 10 μm is light enough and has enough surface area to stay airborne long en
What are the features of the CT 26/36/48 Dust Extractors?
The Festool CT 26/36/48 dust extractors are packed with features and technology to provide you with
Does the TS/C 55 ABSA (part number 491750) Dust Cover also fit my HK/C 55?
Yes. The Dust Cover for the TS/C 55 (491750) will also fit onto the HK/C 55, However! You will nee
My dust extracter stopped working, what do I do?
Can I convert my L Class Dust Extractor to M Class?
No, the M Class Dust Extractor emits an audible alarm when the airflow is reduced and this is not a
Why does my auto clean dust extractor keep beeping when the bag is only half full while sanding dry wall/concrete ?
For sanding dry wall & concrete, plastic waste bag 496215 is recommended. Fine dust generated f
Can I use the Cyclone Separator for fine dust and wood shavings?
Yes you can, the separator has a cyclone cone inside to create air force that makes the larger parti
Why are the filters and bag on my extractor filling up with fine dust/plaster dust so quickly?
Make sure the dust bag is sealed properly. The filter in your Festool vacuum won't get clogged q
Can the cordless CTMC SYS or CTMC MIDI be used to cut small amount of concrete?
The best dust extractors for concrete are the Auto Clean Dust Extractors .Currently, Festool does no
Can I use the same dust extractor for all sanders?
When choosing a Dust Extractor for use with sanders it is important to undertsand what dust class is
What class of extractor do I need? L, M or H?
Firstly, you should determine which types of dust you are faced with at the workplace.This will prov
Can I replace the carbon brushes in my Dust Extractor motor?
The carbon brushes in some motors of Festool Dust Extractors are not available as spare parts. The m
Can I use my CTM MIDI with a CT - VA Cyclone Pre Separator?
Yes you can use the CTM Midi with the VA Cyclone Pre Separator , it will fit on the top of the machi
What are the benefits of a dust separator?
The Festool CT-VA-20 Cyclone Pre Separator (part number 204083) is of the highest benefit when ther
Can Bluetooth module be added to the older CT Midi?
Unfortunately you cannot add the bluetooth (part number 202097) to the older version CT Midi.
Can I use a different brand sandpaper or mesh on my Festool sander?
Yes. However, if the holes in the sandpaper do not align with the dust extraction holes on the sande
Does Festool offer an 18v/240V Dust Extractor?
Currently there’s no such option available in the Festool tool range.
Can I use the cyclone separator on my CTM MIDI?
Yes, you can use the Cyclone Separator on the CTM Midi
Can I pair my non Festool bluetooth tool to the Bluetooth on my dust extractor?
No, a non Festool bluetooth tool cannot be paired to the Festool Dust Extractor. If wanting to use o
Can I attach my belt sander and my rotex sander to my CT26 and run both machines at the same time?
Yes, we have a Y Piece connector allowing you to use both tools simultaneously. The Y piece will c
What are the symptoms of silicosis?
Early on, there are no noticeable symptoms. As the disease progresses however, the first symptoms su
Does using the cyclone (CT-VA) mean I never have to replace the bag?
The CT-VA Cylcone Pre Separator has the benefit of reducing the amount of material/dust entering th
Is it possible to store my Dust extractor on its side for transport, rather than the wheels?
Your Dust Extractor can be transported on it side but the dust may find its way back down the inlet
What Festool products work with 27mm and 36mm hoses
All dust extractable products will work with the 27mm hose.Most tools where applicable, excluding sa
How do I find the right extractor?
To enable dust-free work, you should first carefully consider where the machine will be used.For exa
Can a cable holder fitted to the CT 15?
You can either fit a handle which also includes a cable holder, part no.204310 (https://www.festool.
Working with respirable Crystalline Silica (RCS) Dust
Many Festool users ask what the are the requirements for dust extractors when working with Respirabl
What's the difference between a suction hose and anti static suction hose?
A suction hose is ridged and designed for general clean up duties. Static can build up during use wi
What does HEPA stand for?
HEPA stands for “high-efficiency particulate air.” HEPA filters are designed to trap smaller
HOW DO YOU TELL THE DIFFERENCE BETWEEN REGULAR FILTERS AND HEPA FILTERS
If the package does not indicate results at 0.3 microns of 99.97% or higher, it is not a true HEPA
Is a dust extractor needed when using the Domino DF 500/700?
Yes, a dust extractor should always be used with either Domino machine. Without dust extraction the
Why does my CTH26 white self-cleaning bag sit inside the waste bag?
The waste bag sits outside of the white self clean bag in order to seal and tie the carcinogenic was
Is a dust extraction attachment required for the PF 1200 E Plus Aluminium Milling Machine?
No attachment is required. The dust extractor just hooks on for the PF 1200 E Plus Aluminium Milling
How do I know which dust extractor is suitable for my application?
It is important, particularly when working with hazardous material that you choose the right dust ex
What is silica?
“Silica is one of the most common naturally occurring elements on the planet. Silica is found in t
Can the new cordless dust extractors also be used with mains power?
No, the new cordless dust extractor range are cordless only and cannot be directly plugged into powe
What part number for the straight hose connector do I need to change the right angled fitting to a straight?ridged hose ?
The Anti Static Hose Connector 32/27mm (204919) will work with the ridged anti static hose that co
Can the CTM Midi be used with a D36 mm hose?
Yes you can use a larger hose (part number 204924) but make sure the flow sensor alarm setting repre
How do I join 2 x 27mm smooth anti-static hoses?
Joining two 27mm hoses is acheived by plugging the tool end of the hose of the rotating adaptor (45
Does silica dust leave the lungs?
“The only way to get the retained dust out of the lungs is either to pass it on to other cells or
Why is my CT26/36/48 (M & H Class) Dust Extractor warning signal beeping without extracting hazardous or dangerous dusts?
To safely bypass the warning signal on your CT26/36/48 Dust Extractor you should set the hose diame
Where does silica dust come from?
It’s the dust generated from materials that contain crystalline silica such as stone, rock, sand,
How to tell if an older HEPA filter is worn out?
Once the filter is visible, a close inspection may reveal the fabric has "worn away" leavi
Can Festool Dust Extractors be used for both wet and dry?
All dust extractors except for the CTC SYS can be used as wet and dry extractors. When using for w
Which limit values apply to air at the workplace?
Dust-free work should be facilitated for all workers at the workplace, in accordance with the Hazard
Does Festool still have a filter for the VCP 170 Protool Dust Extractor?
The Filter for the CT 17 is suitable for the VCP 170 in wet or dry.
Wet Filter for CT 17 Main Filte
Can a Festool dust extractor be used to capture aluminium or carbon dust? Which model is best?
Sanding and vacuuming of carbon or aluminium dust requires a brushless dust extractor, as it is high
Can a single extractor be used for both workshops and construction sites?
Yes, the only question is how appropriate it is to use a single extractor for workshops and construc
What bags can I use for my old Protool VCP 480?
You can use the CT 48 replacement filter bags for the VCP 480 (part no. 497539)
My hose piece needs to be replaced or is loose, how to reinstall or replace?
To re-fix the end piece on the hose please watch the short video below:
What dust extractor do I need when working with asbestos?
If asbestos is present during extraction work, only use an H Class certified extractor.
As such dust
Can I use the CT 15 Hepa with a power tool connected?
Yes you can use the CT 15L with a power tool connected and is delivered with a 27mm hose. However,
Can I use a hepa filter (part number 205412) in my CTM 36l M Class Autoclean Dust Extractor for ultra fine particles dusts when cutting MDF board and other fine sanding application?
Yes you can use the hepa filter in the CTM 36l M Class Autoclean Dust Extractor for ultra fine par
Can I reuse a Replacement Self Cleaning filter bag?
The self clean filter bags are designed to capture the dust and for the bag to be sealed off with t
How to tell if a CT filter is not working correctly or wearing out?
Turn your extractor upside down then gently remove the filter and see if there is any dust sitting o
Can I use the CT-VA Cyclone Pre Separator on the CT 15l Hepa Dust Extractor?.
Yes, the CT-VA can sit on the side of the machine.
As the CT 15 does not have Sys locking system,
Can I run my KSC 60 on non Bluetooth batteries?
Yes. Provided they are 4Ah and over 18V. Please note that if non-Bluetooth batteries are used, a Blu
Can the CT 25 be used with a wet filter?
Yes, you can use the Wet Filter for CT 15/MIDI-2 part no. 204202 for wet extraction.
Dust is escaping from the grey long life bag in my Dust Extractor and reaching the filter, why is this happening and what can be done?
The inlet seal on the bag (which is user replaceable see EKAT drawings) could be worn and not sealin
I need a spare part for my CTL Midi Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #478916Cover #47
What is the difference between the new model CTH 26 and the previous model?
The new model CTH 26 has a sensor in the filter to ensure that strictly only a H Class filter is f
I need a spare part for my CT 36 Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #476389Cover #47
Is the CT 15 bluetooth compatible?
No, bluetooth cannot be used with this dust extractor.
Can I use my Cyclone Pre Separator without a lining bag?
Yes, you can use the pre separator tub to collect material, the plastic liner just makes it easier
I have a Planex hose but would like to use the hose on a normal sander and the adapter will not fit. What adapter can I purchase that will fit?
You will need to purchase part number 768135
Can I use the press and clean extractor attachment for CTM Midi?
No, the VS CT AC part number 497926 can only be used for CT AC systems.
Can I plug the Y Piece from my CTM Midi?
Yes, you can you plug the Y piece into the CTM Midi.
Is the Cyclone Separator M class?
When you use the cyclone separator with the plastic bag it becomes M class.
Which hazardous materials are classified as carcinogenic or explosive?
Please see our Dust Safety page for information and resources on working with hazardous materials in
Will a 27mm hose fit both RS 200 EQ Plus Sander and PS 200 E Plus Jigsaw or is an adaptor needed?
Yes. The 27mm hose will fit both the RS 200 1/2 Orbital Sander EQ Plus and the PS 200 E Plus Jigsaw.
Which hose does the PF 1200 dust port fit?
The user just needs to push it in as the adaptor and it will mould to it. To extract the swarf they
How many bluetooth batteries can be hooked up to a dust extractor?
Just one bluetooth battery used with a dust extrator at any one time.
Can I use a dust separator in addition to Auto Clean on my dust extractor?
You will always need to use an Autoclean extractor when you are working on plaster or concrete.
The
On what extractors can I use a H class filter?
The H class filters can be used in the CT 26 or CT 36 and CT 48 dust extractors for improved filtr
What is silicosis?
There are three types of silicosis:
Chronic silicosis, which usually occurs after 10 or more years
How can silica dust be measured?
By an Occupational Hygienist. Melbourne's Eva & Associates have extensive Silica dust expe
What silica monitoring is required for workers and how do I go about it?
“Work Health and Safety (WHS) Regulation 50 states air monitoring by an occupational hygienist mus
How big is the silica dust issue in Australia?
It’s estimated that 600,000 Australians are exposed to silica dust in the workplace each year and
How many bluetooth Batteries can you hook up to a dust extractor?
Only one Bluetooth battery at a time can be connected to a Bluetooth module.
Can I use a long life bag for plaster dust
It is not recommended to use a long life bag for pplaster dust as the bag will clog prematurely redu
Can the CTM 26 be modified to be an auto-clean extractor?
No. Due to the motor design, the CTM 26 cannot be modified to accept an auto-clean system.
Why is dust hazardous?
Tradespeople or people who work at construction sites often produce a high volume of dust while work
Can silica dust cause cancer?
Yes.
How much silica dust is harmful?
It usually takes many years of silica exposure to develop silicosis, but “extremely high exposures
What hose fits a CT 11/22/33 or SR dust extractor?
All the current Festool hoses are compatible to fit these extractors.
Can I get fined for inadequate safety procedures when handling of silica dust?
If you don’t meet your state’s regulations when working with high-risk materials, yes you can ge
Can you see silica dust?
No. Silica dust is almost impossible to see with teh human eye as the particles are 100 times smalle
Are Bluetooth batteries required on cordless tools to be able to use the cordless dust extractor?
No, Bluetooth batteries are not required. Cordless tools with no Bluetooth batteries can be used and
Can the CTMC SYS use any size batteries?
No, the CTMC SYS will only take the 4.0Ah Batteries
Can a long life bag be used in the CTM 36 Planex when sanding with my Planex Dust Extractor?
No, the long life bag should not be used when sanding plaster dust with a PLANEX system. Because pl
What other adapters does Festool have for hoses to attach non-Festool tools?
Festool does not manufacture or stock hose adapters for other brand tools.
To see the full range of
Why should I buy a Festool extractor?
Dust-free work is Festool's top priority.Festool is the only power tool manufacturer to produce
Can you purchase the black hose separately for the CT 25?
No, the hose cannot be purchased separately. However you can purchase the Anti Static Smooth Suction
What is the part number for CS 70 EB filter?
The CS 70 EB filter part number is 447995.
Can you get the dust extraction accessory separate for the RSC 18 saw ?
Yes. the dust extraction adapter is vailable seperately. The part number is 577074.
Can I use dust extraction when cutting aluminium with my KS120/88/60 or TS 55/60/75?
Yes. Dust extraction can be used when cutting aluminium.
Can I use a dust separator in addition to Auto Clean on my dust extractor?
You will always need to use an Autoclean Dust Extractor when you are working on plaster or concrete
Can the CT Hose Garage (part number 494388) be used on the CT 26 and CT36?
No, the CT Hose Garage cannot be used for the CT 26 & CT 36.
What are the silica dust regulations or rules?
They vary State by State. Best place to start is Safe Work Australia. This information is very impo
Who is exposed to silica dust?
Anyone working in a trade that does the following:
Breaking, crushing, grinding or milling material
Can I use the handle for CT 26 (495802) and the cable wrap at the same time?
No, wrapping the cable on the handle for CT 26 would interfere with the storage of dust extraction
Can I use a longer hose with a CT-VA cyclone?
If the longer hose is used in conjunction with a 150mm sander it won’t affect the result, but if i
Why is silica dust dangerous?
Materials that contain crystalline silica are not hazardous unless they are disturbed, generating sm
How long will the CTMC Midi run for?
Its hard to give exact times but testing has given us some approximate examples of run time using 2
Will the CTM Midi standard hose fit on all of my Festool tools?
Yes, the majority of Festool tools will fit on the end of the CTM Midi Hose
I need a spare part for my CTL Mini Longlife Filter Bag
The Long life Filter Bag has three components that are replaceable
Connection Piece #478916Cover #47
I need a spare part for my CTL -SYS Long life Filter Bag?
The CTL -SYS has one spare part available
Cover #10015915
Are filters for the VCP 170 Protool Dust Extractor available?
The Filter for the CT 17 is suitable for the VCP 170 in wet or dry.
Dry filter: https://www.festo
Do I have to use dust extraction with the HK/HKC Saw?
No, it is not necessary to use dust extraction with the HK/HKC saw but for health and safety reason
is it possible to store or transport my dust extractor on its side?
It can be transported on it side but the dust may find its way back down the inlet to the hose. A wa
Can I use the dust extraction nozzle with any drill?
Yes the dust extraction nozzle can be used with any drill and upto a drill bit diameter of 12mm.
I need a spare part for my CT 26 Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #476389Cover #47
I need a spare part for my CT 22 Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #490550Cover #49
I need a spare part for my CT 33 Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #490550Cover #49
I need a spare part for my CT 55 Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #490550Cover #49
I need a spare part for my CT 44 Long life Filter Bag?
The Long life Filter Bag has three components that are replaceable
Connection Piece #490550Cover #49
Do I lose any suction using the Cyclone Pre Separator on my vacuum? Do I need to adjust the hose diameter setting?
There is a slight reduction in suction when using the CT-VA Cyclone Pre Separator. You will need to
How long can a CTMC Midi run for on 2 x 5.2AH batteries?
On 2 x 5.2 aH batteries the CTMC Midi can provide dust extraction for 69 masonry holes ( 8mm x 88mm)
Can I use the CT 15L (577414) with my Kapex Saw?
You can use the CT 15 however we do recommend you buy an antistatic hose with D36 connector to all
Can the 769075 Dust cutting hood for the DSC 125 fit and be used for the cordless DSC- AGC 18V?
No they are not compatible, this hood is only suitable for the 240V version.
My CTH26 giving me shocks, I am using an antistatic hose. Why?
Check that the bag isn't covering the metal prongs on the tub/base of the machine. If so bend the
I need to replace the hood section on the top of vacuum, what are the screws and how do remove them?
They are called Torx screws are size T25 or TX25, so you require a longer enough tool to remove
Is the Autoclean M Class Main Filter compatible with my Protool VCP dust extractor?
Yes, 496172 Autoclean M Class Main Filter is compatible with your Protool dust extractor if it has
Can the main filter be cleaned at all? Perhaps with another dust extractor just to pull the visible soiling off the surface of the flutes of the filter?
Best practice for a clogged filter is changeover as the dust can inpregnate into the filter folds an
Does the Bluetooth still work while a corded tool is connected to a dust extractor?
The Bluetooth switch still works with a Festool remote or a Festool Bluetooth battery even if ther
The dust extraction piece on my EHL 65 has cracked and broken, what part number do I need re order?
This item number is 448785.
Can you use a Festool Dust extractor on a Fein multi tool ?
Yes. A Festool dust extractor can be connected to a Fein Multitool.
What health monitoring is required for workers potentially exposed to silica?
“WHS Regulations state that health monitoring must be provided to workers who are continually work
When would Festool recommend using the Anti Static Smooth Hose D36mm x 3-5m with RFID (204924) instead of the Anti Static Smooth Hose D36 32mm x 3-5m with RFID (204923)
The 204924 (36mm) hose is best for general clean-up when using floor wands/ nozzles, to help minimi
Are there any risks with dust extraction of aluminium in bags or vacuum? ie for CSC 50/ KS/TS tools
When extracting aluminuim chips this can be done with a standard Dust Extractor. When sanding alumin