Routing
Can I buy a 10mm collet for my OF 1400?
The 10mm collet is not available in Australia. Collets that are available for purchase in Australia...
Can the Parallel Rod from the OF 2200 be used in an OF 1400?
No, they are not compatible, the OF 2200 rods are thicker.
I have MFS Multifunction System 700mm Routing Template. Is it possible to use MSF 200 in Lieu of the 700,mm piece in the system when working with smaller pieces?
All the MFS sizes can be linked together.
Do we have a copy ring for MFK 700 to suit Carbitool templates?
The Flat router base (part number: 495674) can take the threaded copy rings for the MFK 700B.
How does the brake operate in my OF 1400 router?
The OF 1400 EBQ has an electronic brake which brings the spindle with tool to a standstill within a...
What part does the brake play on the MFK 700B Laminate Trimmer?
The brake places pressure on the cutter to reduce the likelyhood of the bearing glueing itself to th...
Does the MFK 700 EQ/B include the 1.5 degree trimmer base?
No, this item is sold separately see part number 495165.
Can the 0 degree base plate on the old OFK 700?
Yes you can and you can also use it on the new MFK 700 trimmer, see part number 491427.
Can you use another branded router on the APS 900/2 routing worktop template?
You can use any router with the APS 900 providing it is used with a 14mm diameter cutter and 30mm c...
When should I use the 1.5 degree base plate on my trimmer?
The MFK 700 1.5° router base is perfectly suited to flush trimming of edge veneers. Thanks to the ...
Can I order a base plate for my OF 2000?
These base plate are discontinued and now unavailable.
For all crrent Festool router accessories...
Does the router OF 1400 take all collet sizes?
Yes, the OF 1400 takes all collets. The router comes with the ¼ inch and ½ inch collets as standar...
Can I purchase the OF 2200 rods separately?
Yes, you can purchase the rods separately in a special accessory kit for the OF 2200 router. The pa...
Can the VS 600 Dovetail Joining System can be used with the OF 2200 router and if not, which router is recommended?
Festool advises using the OF1010. The copying ring is supplied with this machine we recommend using...
Why are there smoke and sparks coming from my new OF 1400?
A little smoke coming out from a new motor is normal as there can be some oil on the brushes, causin...
How to use a Festool router with guide rails?
All Festool routers can be used with guide rails. The video below demonstrates how to use a Festool...
What is the minimum thickness for dovetail joins using the OF 1010 EBQ Router?
The minimum thickness for our dovetails is 14mm when using the OF 1010 EBQ Router (576921)
What size collets come with the OF1400 Router?
Quarter inch (1/4) and half inch (1/2) collets come with the OF 1400 Router .
When using Festool routers with screw in copying rings from other manufacturers, what copying rings do I need?
When using Festool routers with screw in copying rings from other manufacturers, use the copying rin...
Will a standard quarter inch shank router bit into an OFK 500?
The OFK 500 has a special fitment (hollow cutter) that can't be adapted to any standard collett...
Is the 494627 standard screw bushings with the 2200 router?
Yes, this is the copy ring for OF2200 to fit screw in bushings.
Does the new OF 2200 Chip Deflector fit on the OF 2000?
No, the Chip Deflector supplied with the new OF 2200 chip deflector does not fit on the older versi...
Can MFS-S Router profiles be joined together end to end (longitudinally)?
Yes MFS-S profiles can be joined together end to end with a longitudinal connector (part 493235).Th...
How can I join MFS routing template extension profiles?
Extension profiles and be joined with routing templates with a special joiner, part number 493235 (l...
What plunge depth setting does the DOMINO 500 need to be set on when using a 4mm cutter?
The Domino 4 mm Router cutter always needs to be set on a depth of 20 mm.
Why does an OF 1010 Plunge Router not fit with a 8mm cutter?
The OF1010 Plunge Router comes with a 1/4inch 6.35mm collet in the box.You would need to purchase ...
Would a 12.7mm copy ring fit a 12.7 mm cutter of any router?
No, The 12.7mm copy ring will not fit the 12.7 mm cutter of any router.The cutter always needs to b...
Categories