Other
Is the FastFix Eccentric Offset Chuck Attachment (205223) compatible with the DRC 18/4?
No, the FastFix Eccentric Offset Chuck Attachment (205223) is not compatible with the DRC 18/4.The ...
How long does the SCA 16 take to charge the new 8Ah battery?
The SCA 16 takes approx 27min to charge the 8Ah battery
Can I use the BHC Rotary Hammer Drill as normal drill and with what attachments?
Yes, you can use the BHC Hammer drill is a standard drill/driver and using the Centrotec adaptor 7...
Can Festool tell me where to get my older battery repacked with new cells, or an after market supplier?
Festool cannot endorse or recommend non-Festool suppliers & services.
What battery can I use with my T15-3 drill, or TI15 impact drill ?
The 500434 14.4V Li-Ion 5.2 Ah Battery pack is compatible with the TI 15 Impact Driver.
How can I locate my closest Festool Dealer?
Use the link to find your closest Festool Dealer (https://www.festool.com.au/find-your-nearest-deale...
What are the stirring rods material and finish?
The rods are steel with zinc oxide coating. For the full range of stirring rods available see this l...
Can I purchase the hose for the CT 15 separately?
Unfortunately the hose for the CT 15 is not sold separately, the closest substitute is the Anti St...
What's the difference between the red and grey abrasives when grinding concrete?
When using the RG 150 with either red or grey grinding wheels , the quality of the finish would be s...
What can silica dust exposure cause?
Lung cancer, silicosis (“an irreversible scarring and stiffening of the lungs”), kidney disease,...
What are the advantages of the KS 60 KAPEX (561695) over the KS 60 KAPEX (561687)?
The advantages of the KS 60 KAPEX (561695) over the KS 60 KAPEX (561687) is that the set also includ...
The M Class Dust Extractors have a maximum combined wattage of 1200w. How can I run a powerful tool with that?
You may find that the dust extractor overloads when drawing more power than the current Australian R...
Whats the longest recommended hose length i can run on a Dust extractor?
There is no recommended hose length. Hose length largely depends on the tool being used. For example...
What standard pad comes with the ETS EC 150/5mm sander as apposed to the ETS EC 150/3mm sander and why?
The ETS EC 150/5mm sander comes with the soft temperature pad part number: 202458 . The ETS EC 150/...
What is the backing pad part number for RS 3?
The part number is 483905 - Backing pad RS 300 LRS 93.For more information on the current range of F...
Can I run my Festool corded tools on a generator?
Festool does not recommend running Festool corded tools on generators as we have seen many cases wh...
What sander is best for me?
To find the right sander for your application you can either use the Sander Selector on the Painters...
Does the new Dust Catcher Bag for the KSC 60 (and KS 60 and KS 120) suit the TS 55R & TS 55F range?
No the new Dust catcher Part No.577173 doesn't fit the TS 55 range. The part number for the TS &...
Can I fine tune for TS 55 if I think the blade isn't accurate?
Yes. There is an adjustment wheel on the top of the depth adjustment that allows calibrating of the ...
Categories