Sanding
Do I need an Air module to use the Lex 3 air sander with my CT Extractor?
Yes, the compressed air module with auto on/off to use the Lex 3 air sander, this is used for our C...
Can the LEX air sander be used for wet sanding?
Although there is no electrics in this tool we still recommend a dry sanding system to be used with ...
My older Festool tool has an oval dust port, and a round ridged dust port. I cant see how the new vacuum hoses with locking tabs work.
The 27mm anti-static hoses will connect to both the oval and ridged dust ports, there is no adapter...
Can you convert all sanders from power to 18v Li using the Ergo Bluetooth battery pack? Part No. 577704
No, this can only be adapted to the cordless sanders ETSC 125, RTSC 400 DTSC 400. The sanders all ha...
How do I know when I need to replace the pad brake in my Festool sander?
To check if the pad brake works, turn on and off the sander without touching material, and see if th...
Any more sanding tips to help reduce swirls or pigtails?
Wipe off your work before you start and also between grits. Adjust your suction to closer to minimum...
I'm struggling to remove the Fastifix pad on my RO 90/125/150 any tip or trick please?
Great question! Our USA Festool mate Sedge has a fantastic technique on display here! We hope this h...
Can I use a Lex 3 air sander with no dust extraction?
Yes, with the IAS adapter (part number 497214) can be used to adapt the tool to operate without an ...
Can I use the dust bag and plastic attachment set for ES 150 on the EC version?
No. The Dust Bag cannot be used on the EC models are without a suction fan to reduce size and weight...
What it the part/item number for Hardwire Kit for RO150 FEQ & ETS 150/3 EQ?
The part number for the Hardwire Kit is 492780 - CONVERSION KIT TO FIXED CABLE
Can I use a different brand sandpaper or mesh on my Festool sander?
Yes. However, if the holes in the sandpaper do not align with the dust extraction holes on the sande...
When should you use interface or protection pads on a sander, eg ETS 150/ RO 150?
Interface pads are needed when you need to conform over curved surfaces. The pads come in 5mm /15mm ...
Can I use my Festool sander to wet sand, if I don't connect a vacuum to the tool?
Some sanders like the ETS 150 , DTS 400 , and any others that have a bag option have a built in fan ...
Does the BS 75 come with a graphite base or cork base?
There is a choice between the cork base or the graphite base for the BS 75mm Belt Sander depending ...
How can I turn down the LED light on my LHS 2 225? I can see an app available in Germany.
Unfortunately the app isn't available in Australia and the light cannot be turned down manually....
What’s a brake in my Festool sander, and when do I need to replace it?
The brake is designed to keep constant pressure to the pad, and stop the pad quickly once you turn t...
Can I use the 80mm Sheepskin Buff Pad on the RO 90m Rotex?
Yes, the 80mm Sheepskin Buff Pad can be used on the RO 90 but it will need to be used with the Foam ...
Can Festool ETS 150 sander be used on aluminum - or similar
Aluminum dust is combustible and therefore should only be sanded with pneumatic tools or by hand.
Why is the pad on my RO 150 free spinning on the sander when in random orbit mode?
The brake seal that lies just beneath the pad needs replacing - check our spare part drawings online...
REVIEW Does the ETS EC range sanders leave swirl marks?
No, the random orbit or eccentric motion is perfect for reaching results quickly and eliminating sw...
Does the delta pad for the DTS 400 fit the RTS 400?
No, the pads for the DTS 400 REQ 100 x 150mm Orbital Iron Head Sander pand the pads for the RTS 4...
Can I use any hose for my PLANEX Sander?
The correct hose to use for the PLANEX sander is part number 577101. The connector has a distinctive...
How do I change the backing pad on the RO 150 FEQ?
Locate the green button on the side of the sander and press in - you will then be able to twist off ...
Why do your pads and abrasives have so many holes?
Festool abrasive pads are designed for maximum dust extratcion and performance efficiency. When an a...
Which backing pad should I use on my ROTEX sander?
This will depend on your application - please see the chart below:
Can I use the triangular base plate 93mm on my RO 150?
No, the 93mm base plate part number 496802 is only adaptable to the smaller Rotex RO 90mm.
My ETS EC 150/3 does not have the extractor signal function shown in some videos
The extractor signal function was removed as a feature on the brushless sanders because it didn’t ...
Can I join a Planex hose and to a normal smooth hose?
If you have the smooth 27-32 hose the planex hose can be plugged into the extractor end fitting. If ...
Is there a hardwire kit for my sander?
There is a hardwire kit for the ETS 150 EQ and the RO 150 FEQ (#492780). The Festool Service Centre...
LHS 2 225 is leaving swirl marks in soft filler
Try reducing the dust extraction and consider using the 220mm interface pad for soft fillers (577252...
I have an ETS 150 can I hardwire this on my own, I purchased kit number 492780?
The ETS 150 & RO 150 can not be hardwired using kit 492780, both these sanders can only be hardw...
My sandpaper no longer sticks to my sanding pad, do I need a new pad? what can I do to protect my pad so they last longer?
You will need a new pad if your sandpaper no longer sticks.
For Granat paper not sticking, try a p...
Is theirs a systainer for the Planex Easy?
Due due its fixed length, there is only a protective bag option, the Carry Bag for LHS E PLANEX Eas...
Does the RO 90 have Rotex motion when the triangle sanding pad is attached?
No, when using the RO 90, the Rotary motion is blocked when the Triangle pad is attached - it will w...
Can my RTS 400 be converted to a DTS 400 sander?
Yes it could be converted by the Festool service centre, but then the original pad from the RTS will...
Do I need to purchase a polishing pad for my RO 90/125/150 or can i use the normal backing pad?
Although you can use the standard backing pad, we recommend the use of a polishing pad. They have a ...
How can I stop wearing out the tips of my RO 90 Triangle pads?
When using your RO 90 Sander working in corners and on edges tends to subject the tip to increased ...
Which 150mm sander should I buy?
Which sander to buy depends on your application - see the chart below to help you decide.
Can I attach my belt sander and my rotex sander to my CT26 and run both machines at the same time?
Yes, we have a Y Piece connector allowing you to use both tools simultaneously. The Y piece will c...
Do you have a sander that can be used as a cordless or mains powered?
Yes, we have a few sanders that have the capability to be corded and cordless
577684 - RTSC 400 Quar...
What lengths can you achieve with the LHS 2 using the extension arms?
The length of the fixed handle is 1.20m. With one arm extender the length increases to 1.70m and wi...
Can I use the standard Plug It Cable on my Planex Sander?
You could use it however we recommend the Planex Plug It Cable (part number 203933) as it is engine...
Can I use the bluetooth app on my new Planex 2 225?
Unfortunately the bluetooth app isn't available in Australia just yet.
Can I use the Festool App to adjust the brightness on my LHS 2 ?
The app is currently not available in Australia.
Should I always run my vacuum and LHS at maximum speed?
Best to adjust the speed of both sander and vacuum to suit the material, surface and finish needed.
Is there a cordless 150mm random orbital sander coming
FYI, this tool is planned in the near future.
Is it recommended to use the frame when sanding with a BS 75mm belt sander?
The BS75 Belt Sander in Systainer with Sanding Frame can be used with or without the sanding frame. ...
Can I use a long life bag for plaster dust
It is not recommended to use a long life bag for pplaster dust as the bag will clog prematurely redu...
Will a 36mm anti static hose connect directly to a Rotex 150 sander or is a connector needed?
A 36mm hose requires an adaptor Anti Static Reducing Sleeve (768135)
Can the DTS 400 be used for round over and small profile sanding?
Interface pads cannot be added to the DTS 400 for round-over and small profile sanding.
As Festoo...
Why should I buy a Festool extractor?
Dust-free work is Festool's top priority.Festool is the only power tool manufacturer to produce ...
Which backing pad should I use with the ETS 125 and Edge Sanding Position Guide?
The pad that comes with the ETS 125 (Soft High Temperature Backing Pad) is suitable. If wanting to...
How much pressure should I apply when using a random orbit sander, ie: ETS /ETS EC 150?
Using just minimal pressure will give best results when using a Festool sander. Users should guide t...
What is the difference between plug-it cables 2003918 & 203933?
For extra reinforcement 203933 has an extended cable grommet that makes it especially suitable for ...
What is the most suitable application for 3mm and 5mm orbit ETS 150 sanders?
The 3mm versions (ETS 150mm Brushless Random Orbital 3 mm Sander) are for fine and extra fine sandi...
Does the BS 75 E come with cork base or the graphite base?
The BS 75 E Belt Sander comes with graphite base (part number 490823). A cork base can also be at...
Can the RTS 400 be used for round overs and small profiles?
Interface pads can be added to the RTS 400 for small profile sanding, two interface pads can be adde...
What is the best sandpaper to use on plaster?
The Granat range of sandpaper is appropriate to use for plasterboard applications.Each individual s...
Is it normal that my ROTEX sander gets warm while in use?
ROTEX sanders run warm while in use however they have have a thermal protection system which preven...
Why does my CT MIDI remote light up when pressed but not start my machine?
Your CT MIDI remote can only be paired to ONE MIDI at a time. The remote needs to be "UNPAIRED...
How to change the backing pad on ETS 150, ETS EC 150?
Using a 5mm allen key counter clockwise undo the bolt, take off the backing pad and vacuum the insid...
What are the different dust classes?
Dust that is produced while working is divided into three classes.This process specifies the extract...
Are the backing pads on hybrid sanders interchangeable?
The backing pads on hybrid sanders are not interchangable. There are different screw configurations ...
What is the standard pad for the discontinued WTS 150 Sander?
The standard pad used for the ETS 150 series can also be used on the WTS 150 sanding machine. Part ...
What standard pad can I use for my old ET 2E sander?
The standard pad for this sander is the soft high temperature backing pad, part number 202458Pads ar...
What is the warranty for sanders and dust extractors?
Festool offer 3 years warranty for all sanders and dust extractor (the tools must be registered) exc...
Does the 150 rotex Pad fit on the on the 125mm machine?
No, these pads have different Fast Fix pad fitting systems so are not compatiable.
Why does the ETS/RO vibrate badly when not fitted with a pad?
This vibration is not an indication of a fault of the ETS/RO sander.The mass of the pad forms part ...
Why does my ETSC/RTSC/DTSC sander produce less power on the mains adaptor than when using a battery?
The sander may cut out at a lesser load when powered by the main adaptor because the mains adaptor ...
Does a 36mm hose fit on to a Domino and sanders?
No.To enable the 36mm hose to fit an adapter will be needed. 768135
What is the green button for on the handle of the LHS 2 225 that looks like an alarm?
This button is the bluetooth function that can be used with the Festool Bluetooth app - unfortunatel...
Can the edge sanding position guide be used for the RTSC & DTSC sanders?
No. The Edge Sanding Position guide can only be used for the following sanders:
ETS 125 REQETSC 125...
How are the two modes - fine sanding and coarse sanding different on the RO 150?
Watch this video for a demonstration of how each mode operates:
Can I use 220mm interface pad for soft fillers for lhs 2 planex with my LHS 225 planex easy?
No. You cant use backing pad 205415 with the PLANEX Easy sander. We recommend you use part number 2...
Can you use the FastFix 93mm pad (part number 496802) on the RTS 400 sander?
No, the RTS 400 sander doesn't have the FastFix attachment to operate the FastFix Base Plate (p...
Can I use the backing plate for the LHS 2 Planex part number 205415 on my Planex Easy?
We recommend you use a Soft Backing Pad (part number 202546) for the Planex Easy This doesn'...
What class of extractor do I need? L, M or H?
Firstly, you should determine which types of dust you are faced with at the workplace.This will prov...
Can I use the same dust extractor for all sanders?
When choosing a Dust Extractor for use with sanders it is important to undertsand what dust class is...
Is there a hard backing pad available for the ETS 125?
There is only soft (part number 492280) and super soft (part number 492282)
Can the 201693 Long life filter dust bag be used for all ETS, DTS, RTS and ETSC, DTSC , RTSC Sanders?
Although the bag is shown as a male the housing can be clipped on for use with the mains powered ETS...
How long do the motor brushes in an RO 150 last?
The brushes last approximately 200 hours. For more information on the RO 150 Sander click here.
What does the 3mm and 5mm orbit relate to in the ETS 150 and ETS EC sanders?
The 3mm and 5mm indicate the orbit size or the sander. The orbit size is the size of the tiny random...
Why does my cordless sander have less power when connected to mains?
Overload Protection on the cordless sander is engaging at a lower point when on the power adaptor th...
How do i change the pad on my RO 150
Please the video below by the reident Festool tool expert, Macca for tips on changing the pad on the...
How thick is the 220mm interface pad (part number 577252) for the LHS 2 225 Planex Drywall sander?
The 577252 pad is approx 8mm thick.This interface pad dampens the PLANEX LHS 2 225 application press...
What are the sizes of replacement dust bags for sanders?
Sizes of replacement bags for Festool sanders are as follows.
RS/RTS 400, DS400, DTS400, ES125, ...
What are the speeds for cordless sanders?
Cordless sanders speed is 6,000 - 10,000 RPMs, which is a little slower from the Festool brushless s...
What setting do i use on the ROTEX for polishing
When requiring to polish with the ROTEX the tool should be in the geared mode. Variable speed can b...
Does part number 488036 for the RO90 V93 fit the standard pad part for part number 496802?
497483 is the replacement base for the slat pad.
Can somebody come out to me and show me your range?
Yes! Book a tool demo and leave the rest with us!
Is the DELTA 100 x 150/7 pad Item No. 493723 suitable to convert onto the RTSC 400 sander to gain more flexibilty?
DELTA 100 x 150/7 pad Item (493723) is not compatible as the attaching screws are a different confi...
When using a RTSC 400, DTSC 400 or ETSC 125, why does the overload protection engage when under pressure on power adaptor and not when same pressure is applied and it is on battery?
Due to the limitation of the adaptor it will cut out when overloaded. for this reason significantly ...
Categories