Slide Compound Saws
Does the KSC 60 bevel to the left and right side and by how much?
Yes, the KSC 60 bevels 46 degrees L and 47 degrees R.
How do I remove the blade from my KS 120 KAPEX?
There are directional arrows on the screw, to loosen the blade turn key clockwise and to tighten tur...
Can a laser be fitted to the KS 88 instead of purchasing the KS 120?
KS 88 Lasers CAN be retrofitted but it is not economical to do so. Although all the switching and el...
Why is the laser on my KS 120 Kapex dim and/or blurry when in use?
To remove and clean the laser window on the KS 120 firstly unscrew window holder screw 2-3 turns. P...
What is the bed height of a KS 120 KAPEX 260mm Slide Compound Mitre Saw?
The KS120 has a bed height of 108mm.
What is the difference between the KS 120 EB and the KS 120 REB?
The R stands for relaunch. here is a summary of improvements:
A new base with integrated sliding tab...
My KAPEX leaks a bit of oil when it has been sitting for a while, should I be concerned?
There is a small allowance for oil that has seperated from the grease while the saw is not in use an...
The guard on the KS 120 is not retracting correctly, what can be done to fix it?
To try and remmedy the non-retracting blade, follow these steps:
Disconnect the power or remove the ...
The laser on my Kapex seems dull, is something wrong?
The screw right hand side of the laser can be loosened and the laser lens removed. The lens can then...
How many cuts can you make with the KSC 60?
There are many variables when it comes to measuring this but we have run tests and can advise that 2...
Can I use my 50mm hose with a Kapex?
No. The KAPEX will only take a 27mm internally or a 36mm externally on the outlet.For teh full range...
What's the difference between KS 120 laser guide, and KS 60 light led guide?
The KS 120 has 2 laser lines, showing the user the outer lines of where the blade will cut.The KS 60...
Is there a special Festool stop/clamp for short lengths (100-180mm) repeating cuts on my KS 60?
No there is no stop or clamp for this. Festool does not offer a stop for this application.
Can I use the side extensions (part no. 201909) on a KS 60, without the mobile trolley? Can I use the extensions on the ground, or work bench,with extension legs folded?
This is an option, however you must also use the adapter plate (part no. 202056) and the extensions ...
Categories