Joiners
How are DOMINO cross stops calibrated?
The DOMINO joiners have pins in the cross stops with adjustable cam attachments and can be pivoted i...
Are the cross-stops for the DF 500 / 700 intercompatible?
Yes, you will need to flip the stop as DF 500 is 10mm from base to centre, the DF 700 is 15mm.
Can I use the 15mm drilling template for my DF 700?
The drilling template 203164 can only be used with the DF 500, used with a dust extractor to specify...
When to choose DF 500 Domino or DF 700 Domino
When working with small to medium materials the Domino 700 is large and in some cases more awkward w...
Is a dust extractor needed when using the Domino DF 500/700?
Yes, a dust extractor should always be used with either Domino machine. Without dust extraction the...
What are the approximate load capacity of Domino Tenons ?
Please see the table below:
DOMINO STRENGTH TABLE SHEAR Average strength ...
What size cutter does the Domino 500 come with? Can I buy the cutters in a set pack?
The DF 500 comes with the D5 (5mm) cutter. You can buy the other size cutters separately. See the D...
Has Festool got corner connectors for the DF 500?
There is a corner connector vailable for the DF500 and can be used for material from 18mm up to 28m...
Why do I need a Domino when I am using a connector (DF 700)?
By using a normal Domino with the corner connector it will eliminate rotating moment and also give t...
What are the width settings on the DF 500 domino
The DF 500 DOMINO Joining Machine has three settings. In the standard setting - it's a tight to...
How to Fix a DF 700 when the cutter is jammed
When fitting cutters to the DF 700 it is very important that the operator does not over tighten the...
Can the 8mm and 10mm long dominos be used with DF 500 as well as the DF 700?
Yes, as the DF 500 takes the 8mm (part number 498686) and 10mm (part number 498687) cutters, the...
Can I use the DF500 cutters on my DF700?
No. The cutters have differing threads so cannot be fitted to each other.
Can DF700 cutters be used on the DF500 ?
The DF 700 cutter cannot be used on the DF 500 . The cutter have differnt thread sizes and the DF 7...
Can the 750mm long dominos available in 8mm and 10mm also be used for the DF 500?
Yes, as the DF 500 takes the 8mm and 10mm cutters, the longer (750mm) dominoes can be cut to length ...
Which is stronger, the domino connector or the actual domino?
The DOMINO connectors are for stability within the join and the actual DOMINO's bear the load....
Can DF500 joiners cutters be used on the DF700
No. The DF 500 DOMINO cutters are not compatible with the DF 700 DOMINO.
Why is my DF 500/700 Domino cutting slots at an angle?
In order to correct this issue on the DOMINI DF 500/700, adjust the rate at which the tool is fed i...
Does a 36mm hose fit on to a Domino and sanders?
No.To enable the 36mm hose to fit an adapter will be needed. 768135
What are the Load Ratings for XL DOMINO Connecting Bolts?
PLEASE NOTE: these connectors are not designed for loadThe material of XL-DOMINO connecting bolts ca...
Categories