Supplied with Order when Purchased from festool.com.au or by Redemption when Purchased from Dealers

*applies to tool below and selected tools only - offer valid to 22/12/2024

Product Tabs Menu

CSC SYS 50 18V Cordless 168mm Systainer Saw Basic

CSC SYS 50 EBI Basic
Item No.
576820
In stock
Quantity in Pack:
1
Packaging:
Carton
$2,749.00
Redeem
Offer
Purchase CSC SYS 50 18V Cordless 168mm Systainer Saw Basic and redeem Festool Outdoor Camp Chair worth $139. Valid to 22/12/2024

Functions

Precise sawing to go. The cordless table saw in Systainer format.

The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use, as it is tremendously convenient in its size.

Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled cuts of -2° to 47°. The unique digital operation produces results with maximum precision, down to accuracies within a tenth of a millimetre.

The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines.

Together with the UG-CSC-SYS underframe, you have the perfect worktable immediately on hand, and transport from the vehicle to the point of use thus succeeds effortless. The CSC SYS 50: Precise sawing to go.

  • Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°.
  • Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
  • Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe.
  • Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
  • Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured.
  • Convenient: Four saw blade positions can be saved and selected via the digital display.
  • Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
  • Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
  • Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision
  • Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results
  • Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance
  • Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free
  • Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display
  • Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor
  • Healthy working with a system: Ideal also in combination with the Festool cordless extractors
  • Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment
  • Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one
  • Unique: Three-year warranty for battery packs and chargers too

Main applications

  • Cross-cuts up to 450 mm wide, quick and precise with the integrated slide
  • Rip cutting up to a cutting height of 48 mm and a width of 280 mm with a secure support on the integrated fold-out table
  • Angled cuts from -10° to 47° thanks to tilting saw blade
  • Exact height and angle adjustment by means of electric stepper motors. Can be set precisely to 0.1 mm and controllable via a display
  • Transport practically in the handy Systainer format

Product Details

Parallel cuts up to 280 mm

The folding table ensures compact dimensions during transport and a precise, stable support for workpieces of up to 280 mm when sawing.

+

Cross-cuts up to 450 mm

An impressive cross-cut width of up to 450 mm is possible.

Angled cuts from -2° to 47°

Angled cuts from -2° to 47°; at a cutting height of up to 35 mm, even down to -10°.

Mitre angles from -70° to +70°

The angle can be optimally adjusted via the exact scale; predefined catches also make selecting the most important angles easier.

+

Technical Data

Cutting Height 45° (mm)
0 - 34 mm
Mitre Angle (°)
0 - 70 °
Dimensions W x D x H (mm)
512 x 396 x 296 mm
Inclination Angle (°)
-10 - +47 °
Battery Voltage (V)
2 x 18 V
No Load Speed (rpm)
4 500 – 6 800 min⁻¹
Dust Extraction Connection Diameter (mm)
27/36 mm
Power Source
Cordless
Weight (kg)
15 kg
Drive Type
Battery
CLEANTEC Dust Extraction
Standard adapter (27/36/50 mm) for dust extraction to safeguard the operator and the environment.
FastFix
Makes changing accessories or consumables for routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Groove in Saw Table
For fixing and for safeguarding against accidental workpiece slippage, using lever clamps.
MMC Electronics
Multi Material Control power electronics with adjustable constant speed and temperature monitoring for work with all types of materials.
Quick Acting Brake
For safe work when planing, sawing and routing.
Splinterguard
Patented splinterguard for splinter free cuts on both sides when sawing.

Reviews

Write Your Own Review
Accessories
All Accessories
You can view 9 of all possible accessories items here
FAQ
What batteries will the CSC SYS 50 take?
The CSC SYS 50 Cordless table saw will take any battery over 4.0Ah.To see the full range of availabl
Do the batteries in the CSC SYS 50 need to be the same Ah?
No, they do not need to be the same Ah, as long as both batteries are 4.0Ah or above they will work.
Can the CSC SYS 50 be plugged in to power as well as run on batteries?
No, the CSC SYS 50 runs on battery power only. There is no facility to plug the saw into mains power
Can I run the CSC SYS 50 on one battery only?
No, the saw requires two batteries of 4Ah or more to operate.For the full range of Festool batteries
How do I fit or remove riving knife and blade guard on my CSC SYS 50?
To remove, put the blade in the park position, turn off the saw. Using the allen key supplied, push
My CSC 50 trolley wheels are seizing, what can be done?
Remove the plastic cap (with the Festool logo on it) on CSC 50 Underframe and spray some grease int
Can any combination of 4ah/5.0/5.2/6.2/8ah batteries be used in a dual battery tool saw, ie KSC 60/TS55/60 or CSC50.
Yes, but please note, once the lower Ah battery is drained, the speed option is reduced, before the
Does the Bluetooth on a Festool vacuum connect to the CSC 50 tool, or does one of the batteries need to be Bluetooth?
To use the Bluetooth feature from the dust extractors to Festool tools at least one of the batteries
I bought the CSC SYS 50 Cordless 168mm Systainer Saw and would like to buy the table?
The Systainer Saw Mobile Underframe is available to purchase #577001 
Which saw blades are for which application?
Festool Saw Blades are identified by a coloured ring around the central arbor. The colour of the rin
Can I use my adjustable angle stop on the new CSC SYS 50?
No, the design for the adjustable angle stop is very different for the new CSC SYS 50​. It sits ve
Can I use 1 x 5.0 Ah and 1 x 5.2 Ah battery with either of my TSC 55 or a SCS Sys saws?
Yes.Batteries can be used in different AH configurations.
When using the KS 60/88/120 and wanting maximum extraction, should you plunge the blade into the top of the material?
For best dust control drop the blade and start your cut at the outer edge of the material , and slid
My CSC 50 trolley wheels are running rough and is some cases seizing, how do I fix this problem?
Please remove the cap from the CSC 50 trolley wheels and spray some grease into the hub area you ca
578055 - Light Module for OF 1010R. Can I purchase the light or battery as a spare part?
No, unfortunately they cant be purchased separately