KSC 60 KAPEX 18V Cordless 216mm Slide Compound Mitre Saw Basic

KSC 60 EB-Basic
Item No.
In stock
Quantity in Pack:

Mobility, versatility and best results – perfectly combined.

The new KAPEX KSC 60 dispenses with everything not needed for the job – such as every unnecessary gram of weight.

With impressive features such as ergonomically positioned carrying handles, transport safety device and an extremely compact design thanks to flush-mounted guide rods, this device makes no compromises in terms of precision and versatility – with a mitre angle on both sides of up to 60 degrees and an inclination angle on both sides of up to 46 or 47 degrees.

The Festool twin-column guide with two bearings ensures that the saw blade is guided reliably and smoothly. A range of other clever details such as the LED spotlight, the pull-out extension table, the additional groove function and the bevel help to make the KAPEX KSC 60 a perfect combination of mobility, versatility and optimum results.

  • Compact and lightweight, with ergonomic handles.
  • LED spotlight to show cutting lines precisely (included in the set or available as an accessory)
  • Bevel for producing interior and exterior angles
  • Inclination angle of up to 47°/46° on each side and mitre angle of up to 60° on each side
Limitless mobility

With ergonomically positioned carry handles and a practical immobiliser for transport. Also extremely compact due to the flush-mounted guide rods, and light in weight

Maximum power, almost endless stamina

You can't tell the difference – the combination of the brushless EC-TEC motor and dual battery system (2 x 18V) gives the KSC 60 the same impressive power as a corded tool, but with full mobility at the same time.

Maximum precision

Dual ball-bearing mounting: Festool's twin sliding rails ensure smooth and reliable guidance of the saw blade for maximum precision – with no wobbling or juddering.

Maximum range of application

Thanks to the mitre angle of up to 60 degrees on both sides. The angle is set using the latch on the base, with quick selection of preset mitre angles using detents. Any other angle can be freely selected and set

Hugely versatile

Thanks to a bevel angle on both sides of up to 47 or 46 degrees. The angle is set using the easyto-access and easy-to-operate clamp together with the high precision angle scale

Optimum view of the scribe mark

The LED transfers the sharply defined shadow of the saw blade onto the material, for a precise display of the cut line

Also for long workpieces

The variable-width, pull-out extension table provides secure and precise support even for long workpieces.

Trenching function for even greater versatility

With the cut depth limiter, you can also cut trenches quickly and precisely.

Saves time and reduces errors

The SM-KS smart bevel makes it easy to quickly measure internal and external angles and then transfer the measurement accurately to the saw.

Additional working surface

The additional feet raise the work table of the KSC 60 exactly to the height of a Systainer SYS 3 M 112 or SYSTAINER SYS 1. This means the latter can also be used as a workbench for reliable support of long workpieces. Additional working surface


For less dusty work even without a dust extractor, the dust catcher catches the dust directly where it is produced.

For left and right handers

Switch and grip are positioned centrally – for equally comfortable operation with the right hand or the left.

Tech Specs
Cutting Depth at 45°/90° (mm)
215 x 60 mm
Cutting Depth 45°/45° Left (mm)
215 x 40 mm
Cutting depth 45°/45° Right (mm)
215 x 20 mm
Cutting Depth 90°/90° (mm)
305 x 60 mm
Mitre Angle (°)
60/60 °
Dimensions W x D x H (mm)
661 x 475 x 430 mm
Inclination Angle (°)
47/46 °
No Load Speed (rpm)
1300 - 3500 min
Saw Blade Diameter (mm)
216.00 mm
Dust Extraction Connection Diameter (mm)
27/36 mm
Weight - with 1 or 2 x 18V (Battery Pack)
17.1/18.5 kg
Power Source
Motor Type
Customer Questions
Can I use my 50mm hose with a Kapex?
No. The KAPEX will only take a 27mm internally or a 36mm externally on the outlet.For teh full range...
Can you use one battery, or any battery, on the KSC 60?
The KSC 60 EB operates on one or two 4 Ah or higher batteries . With only one battery installed you...
Can any combination of 4ah/5.0/5.2/6.2/8ah batteries be used in a dual battery tool saw, ie KSC 60/TS55/60 or CSC50.
Yes, but please note, once the lower Ah battery is drained, the speed option is reduced, before the ...
Can I run my KSC 60 on non Bluetooth batteries?
Yes. Provided they are 4Ah and over 18V. Please note that if non-Bluetooth batteries are used, a Blu...
Which saw blades are for which application?
Festool Saw Blades are identified by a coloured ring around the central arbor. The colour of the rin...
Accessories & Consumables
Show All Accessories & Consumables
Write Your Own Review