RO 150mm ROTEX 3 in 1 Random Orbital Sander in Systainer

The original 3-in-1 principle for a complete sanding solution


RO 150 FEQ-Plus
Item No.
Replaces Item No.
In stock
Quantity in Pack:
Systainer3 SYS 3 10 Slot for 150mm Abrasives Purchase RO 150mm ROTEX 3 in 1 Random Orbital Sander and redeem Systainer3 SYS 3 10 Slot for 150mm Abrasives worth $160. Valid to 28/03/2024

The unrivalled original for more than 30 years: The ROTEX RO 150 with 3-in-1 – for coarse sanding, fine sanding and polishing. Lighten the load of your tool kit while increasing the range of applications with just one tool for an extremely high material removal rate during coarse sanding, a super-fine result when fine sanding and a perfect finish when polishing.

Combine with Festool's GRANAT abrasive and the appropriate mobile dust extractor to save time and money, producing a clean and perfect sanded or polished surface first time round.

Main Applications

  • Sanding off old paint and varnish
  • Sanding wooden materials
  • Renovation work such as sanding steps
  • Sanding and polishing mineral materials
  • Preliminary and coarse sanding of repair compound
  • Hologram-free polishing
Cost-efficient 3-in-1 principle

Three tools in one. By using the ROTEX, you can perform three different operations without changing devices: Coarse sanding, fine sanding and polishing. Just flip the switch to another setting and you're ready to go.

Ergonomic device design

The ROTEX RO 150 fits comfortably in your hand in any grip position and can be guided accurately. The housing is narrow and compact, the weight surprisingly low and vibrations have been reduced significantly.

Protects the sanding pad and workpiece

Sand safely against abutting edges without the risk of kickback with the Festool PROTECTOR.

Smooth running

The large internal contact surface ensures the sanding and polishing pad runs extremely smoothly and reduces imbalance and vibrations.

Changing pads without using tools

Simple, fast and safe. FastFix interface for changing sanding and polishing pads quickly without using tools. This means that you can respond to changing tasks and material requirements.

Removable extraction channel

The extraction channel can be removed with a simple hand movement, so that you can polish the whole device with no obstacles.

For optimal operation: MMC electronics

Different materials, different requirements: You can use the MMC electronics to control smooth start-up, overheating protection and infinitely variable speed adjustment.

Long service life

The double-sealed long-life gearbox, which is virtually hermetically sealed, makes your ROTEX RO 150 even more durable, even under the toughest operating conditions.

Tech Specs
Tool Weight (kg)
2.3 kg
Dust Extraction Connection Diameter (mm)
27 mm
Rotary Motion Speed (rpm)
320 rpm - 660 rpm
Sanding Stroke
5 mm
Sanding Pad Diameter (mm)
150 mm
Power Lead Type
Plug-it Lead
Power Source
Power Consumption (W or kW)
720 W
Motor Type
Orbital Motion Speed (rpm)
3,300 rpm - 6,800 rpm
RO 150 ROTEX Sander
1 x Granat Abrasive Disc P80
Tool Manual
Customer Questions
Can I change european plug-it cable to an Australian plug?
No. You cannot change the European plug-it cable with an Australian plug if the tool is 240V.If  to...
How are the two modes - fine sanding and coarse sanding different on the RO 150?
Watch this video for a demonstration of how each mode operates: 
Do I need to purchase a polishing pad for my RO 90/125/150 or can i use the normal backing pad?
Although you can use the standard backing pad, we recommend the use of a polishing pad. They have a ...
How do I change the backing pad on the RO 150 FEQ?
Locate the green button on the side of the sander and press in - you will then be able to twist off ...
Which 150mm sander should I buy?
Which sander to buy depends on your application - see the chart below to help you decide. 
Which backing pad should I use on my ROTEX sander?
This will depend on your application - please see the chart below: 
Is there a hardwire kit for my sander?
There is a hardwire kit for the ETS 150 EQ and the RO 150 FEQ (#492780). The Festool Service Centre...
Can I use the triangular base plate 93mm on my RO 150?
No, the 93mm base plate part number 496802 is only adaptable to the smaller Rotex RO 90mm. 
Accessories & Consumables
Show All Accessories & Consumables
Write Your Own Review