FS Guide Rail with Adhesive Pads 1400mm

FS 1400/2-KP
Item No.
In stock
Quantity in Pack:
Display pack


Invented and perfected by Festool: The guide rail with adhesive pads. Allows users to make straight and precise cuts when carrying out horizontal work on floors or work surfaces, as well as for applications on walls. Easy to secure of different surfaces using the adhesive pads. It is easy and practical to transport two guide rails since they can be inserted above the Systainers carrying handle. The FS/2-KP guide rail is available in lengths of 1400 mm and 1900 mm.

  • Secure grip: The guide rail with adhesive pads – precise and safe sawing even in difficult positions
  • Practical to transport – the guide rail can be inserted above the Systainers carrying handle
  • Splinter-free cuts – the rubber lip right at the scribe mark prevents the edges from splintering even with angled cuts
  • Coating for smooth running on the machine
  • The adhesive cushion strip protects the workpiece surface from being damaged
In any position

The adhesive pads can be used to secure the guide rail to work surfaces, floors and walls. This means that straight cuts can be made in any position.

Adhesive pads for a secure hold

The adhesive pads are quick and easy to install in the guide rail cut-outs. Align the guide rail, press down the adhesive pads – and you're ready to start work.

Remove any residue

Even on delicate surfaces, the adhesive pads are easy to remove without leaving unwanted residues and without damaging the surfaces.


It is also simple to transport two guide rails above the Systainers carrying handle thanks to the cut-outs in the guide rail.

Angle stop for precise cuts

The angle stop can quickly be attached to the guide rail without tools. For precise angled cuts from -60° to +60°

Precision angle transfer

By using the combination bevel along with the guide rail, angles can be directly and easily marked on a workpiece – without a great deal of calculation and effort.

Exact grooves

Using the router with the stop allows you to produce precise, straight grooves. Place directly on the guide rail and start routing.

Zero-play guidance

The guidance jaws of the circular saws can be adjusted to fit the guide rail without tools. This allows the machine to be guided without play and produces exact cuts.

Connect comfortably

The self-aligning connecting piece makes it quick and convenient to connect two guide rails so that they are straight. For long, straight cuts and perfect work results without deviations.

No getting caught

The deflector prevents the suction hose and cable from getting caught up on the end of the guide rail.

Tech Specs
Length (mm)
FS/2-KP Guide Rail 1400mm
Customer Questions
I am not happy with the repair, how can I get in touch?
If you are not satisfied with how your repair was handled or the outcome you can either contact our ...
How far can silica dust travel?
“Silica dust less than 10 μm is light enough and has enough surface area to stay airborne long en...
Can a cable holder fitted to the CT 15?
You can either fit a handle which also includes a cable holder, part no.204310 (https://www.festool....
REVIEW The screws in the FS Guide Rail Joiner seem tight and hard to manoeuvre with the allen key.
The joiner screws are tight as they insert into a tapered fitting to expand the steel.They do not ne...
Can the grub screws for my guide rail connector be purchased seperately?
Yes, the part number is 203816 and these can be ordered direct from your closest Festool Dealer or ...
What is the part number for the Grub Screws in the Guide Rail Connector/Joiner?
The part number for the self aligning guide rail connector is 10493818 
Write Your Own Review