Adaptor Plate for KA 65 MFT Table

Create the perfect edge
AP-KA 65
Item No.
In stock
Quantity in Pack:

Adapter plate for using the KA 65 Conturo as a stationary machine with the MFT workbench. Mounting plate complete with additional roller and 15 guide plates.

Tech Specs
Swivel Range
0° - 47°
Height (mm)
150 mm
Adapter Plate
Customer Questions
Why does the KA 65 Conturo Edge Bander have a dust port?
The dust port on the KA 65 Conturo Edge Bander can be used for transfer of fumes or cooling of the m...
How can I clean my KA 65 to if I use PU glue?
You can use the polyurethane rinsing agent, must be used after working with PU adhesive to prevent c...
What degree is the trimming base for trimming angle cuts after laminating?
There are bases avaliable for horizontal trimming of mitres that are 1.5 degrees and 0 degree. 
Does the edging magazine for the KA 65 including a cutter to cut material?
No, the edging magazine doesn't have a built in cutter. Its for the safe guidance of delicate an...
Can I remove the handle off the KA 65 ?
Yes the handle is removable to attach to the table and to store back into the systainer. 
How can I keep my marterial scratch free when using the edge bander?
The scratch free base pad comes with a felt layer keeping delicate or high gloss surfaces safe. 
How long does it take for the glue to heat up in the KA 65 Conturo Edge Bander?
In just 8 minutes the glue will be heated and the machine will be ready to use. 
What degrees is the glue ready to use for the KA 65?
When the glue is at 190 degrees it is ready for use. 
Is the MFT basic table still available?
The basic version is discontinued, the current option is the MFT 3 set (item number: 495315) 
What is the standard edge height that can be used on a KA 65?
The standard height is 21mm however the range is 18-65mm and edge thicknesses of 0.5-3.0 mm. 
Write Your Own Review