DRC 18V Cordless 4 Speed Drill Basic in Systainer

With four gears and full power – to last a lifetime.

DRC 18/4-Basic
Item No.
576458
Replaces Item No.
574695
In stock
Quantity in Pack:
1
Packaging:
Systainer-2
$499.00
Features

For drilling and screwdriving with large diameters, the QUADRIVE DRC 18 cordless drill delivers high power and speeds with its robust four-gear metal gearbox. Powerful screwdriving with a torque of 60 Nm in first gear and precise drilling with 3,800 rpm in fourth gear are no longer a problem. Whether working with wood or metal – the DRC 18 is extremely tough and its maintenance-free brushless EC-TEC motor ensures excellent durability.

 

Main applications

  • Production of wooden substructures, frame structures
  • Installation of doors and windows
  • Drilling and screwdriving in wood, metal and plastic
  • Drive screws into wood up to 10x300 mm
  • Drilling in wood up to 50 mm with Forstner drill bits
Robust metal gearbox

Withstands the enormous forces and speeds of the brushless Festool EC-TEC motor, even for long periods.

Intelligent motor management

The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltag

Durable and extremely light

The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task. The 5.2 Ah battery pack i

Can be individually adjusted

You can perfectly adjust both the torque (in 12 stages) and the speed to your job requirement. If the preset value is exceeded, the electronics switches the device off.

Optimal lighting

The LED light can be switched on, enabling precise work to be carried even in dark corners.

In the smallest of spaces

The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

CENTROTEC quick-change system

Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls –

Chuck for standard tools

The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.

EC-TEC Brushless Motor
The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.
FastFix
Makes changing accessories or consumables for routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Torque Shut Off
Intelligent technologoy ensures the optimum screwdriving force for every material.
Electronic
Speed control for adjusting to the working material.
Tech Specs
Tool Weight (kg)
1.8/1.9 kg with 4.0/5.2 Ah Li-Ion battery
Drilling Diameter Steel (mm)
13 mm
No Load Speed 1st Gear (rpm)
0 - 400 min⁻¹
No Load Speed 2nd Gear (rpm)
0 - 850 min⁻¹
Drilling Diameter Wood (mm)
50 mm
Battery Voltage (V)
18 V
Gears
4
Torque Adjustment 1st Gear (Nm)
1.2 - 11.5 Nm
Torque Adjustment 2nd Gear (Nm)
0.8 - 7.2 Nm
Maximum Torque Wood (Nm)
40 Nm
Maximum Torque Steel (Nm)
60 Nm
Chuck Range (mm)
1.5 - 13 mm
No Load Speed 4th Gear (rpm)
0 - 3800 min⁻¹
No Load Speed 3rd Gear (rpm)
0 - 1850 min⁻¹
Write Your Own Review
Write a review >>