DRC 18V Cordless 4 Speed Drill 5.2Ah Set in Systainer
With four gears and full power – to last a lifetime.
For drilling and screwdriving with large diameters, the QUADRIVE DRC 18 cordless drill delivers high power and speeds with its robust four-gear metal gearbox. Powerful screwdriving with a torque of 60 Nm in first gear and precise drilling with 3,800 rpm in fourth gear are no longer a problem. Whether working with wood or metal – the DRC 18 is extremely tough and its maintenance-free brushless EC-TEC motor ensures excellent durability.
Main applications
- Production of wooden substructures, frame structures
- Installation of doors and windows
- Drilling and screwdriving in wood, metal and plastic
- Drive screws into wood up to 10x300 mm
- Drilling in wood up to 50 mm with Forstner drill bits
Withstands the enormous forces and speeds of the brushless Festool EC-TEC motor, even for long periods.
The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.
The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task. The 5.2 Ah battery pack is the right choice for even more power for particularly difficult drilling and screwdriving applications.
You can perfectly adjust both the torque (in 12 stages) and the speed to your job requirement. If the preset value is exceeded, the electronics switches the device off.
The LED light can be switched on, enabling precise work to be carried even in dark corners.
The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.
Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.
The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.
The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.
-
CENTROTEC Drill Chuck$40.00 -
Soft Grip Side Handle 185 mm$30.00
