DR 20 1100W FastFix High Power Drill

The high-torque drill.

DR 20 E FF
Item No.
In stock
Quantity in Pack:

The QUADRILL DR 20 is the powerhouse for extreme drilling and screwdriving tasks: Ideal for drilling holes up to 20 mm in steel or 65 mm in wood and with a 98 Nm torque for screws up to 12 x 300 mm. The FastFix interface provides flexibility: In applications where previously several machines had to be used in order to drill in narrow spaces, for example, or tighten large or small screws, the only tool that is now required is the QUADRILL DR 20, thanks to the lightning-fast attachment changeover.

Main applications

  • Production of wooden substructures
  • Timber frame construction
  • Through-holes in wood
For extreme applications

With a 98 Nm torque, screws up to 12x300 mm can be screwed in quickly and easily.

Extremely robust

The large collet with reinforced drive shaft and large spindle makes the QUADRILL extremely robust – perfect for the construction site.


The FastFix adapters can be assembled without tools and make it easy to switch between drilling, screwdriving and angular screwdriving.

Fast bit changes

The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

CENTROTEC quick-change system

Fast changeover between applications: The CENTROTEC CC-XL chuck is a chuck and bit holder in one, which is smaller and lighter than a standard chuck. And at the same time it has ten times the run-out accuracy of a bit holder.

Always exactly the right drilling and screwing depth

Depth stop for applications that require an exact drilling and screwing depth.

Speed control for adjusting to the working material.
Makes changing accessories or consumables for routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Forward and Reverse Rotation
For screwing and unscrewing screws.
High Torque
Tool with high torque.
Tech Specs
Tool Weight (kg)
3.4 kg
Drilling Diameter Steel (mm)
20 mm
No Load Speed 1st Gear (rpm)
0 rpm - 650 rpm
Drilling Diameter Wood (mm)
65 mm
Collar Diameter (mm)
57 mm
Power Lead Type
Fixed Lead
Power Source
Power Consumption (W or kW)
1,100 W
Motor Type
Maximum Torque Wood (Nm)
98 Nm
Maximum Torque Steel (Nm)
98 Nm
Chuck Range (mm)
3 mm - 16 mm
DR 20 Electric Drill
Depth Stop Pin
Tool Manual
Accessories & Consumables
Show All Accessories & Consumables
Write Your Own Review
Write a review >>