CTM 36l M Class Dust Extractor

Lightweight yet powerful

CTM 36 E FS
Item No.
576741
In stock
Quantity in Pack:
1
Packaging:
Carton
$1,649.00
Redeem
Offer
Systainer3 Medium 89mm x 396mm 22 Compartment Organiser Purchase CTM 36l M Class Dust Extractorand redeem Systainer3 Medium 89mm x 396mm 22 Compartment Organiser worth $153. Valid to 28/03/2024
Features
  • Guarantees efficient dust and chip extraction, extremely important for sawing, sanding or routing work on site or in the workshop
  • Clever flat filter design maximises the volume of dust that can be held while maintaining high suction power.
  • Suction power is adjustable and the switch on/shut off function allows the extractor to turn on automatically when required and turn off when not.
  • Approved for dust class M, and with the option of fitting air modules, Festool's CTM 36 promises healthy, dust free working conditions at every job.

 

Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report

Test report: ESP Airborne Occupational Exposure Report

 

Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.

Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.

When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.

When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)

MAIN APPLICATIONS

  • For dust with limit values > 0.1 mg/m³
  • Flexible and clean in the workshop and on-site thanks to compact design
  • Integral automatic electronic switch-on/shut-off for extraction from electric power tools
  • Suitable for both wet and dry extraction

 

Machine compatible

Festool dust extractors have integral automatic electronic switch on/shut off functionality and a smooth delay start up to avoid power surges.

Maximum utilisation

The flat filter design allows the filter bag to unfold easily and expand to use almost 100% of its capacity. Hold more dust in a more compact extractor.

High suction power

Super strong and yet super small, the high power turbine provides considerable higher suction power but takes up very little room.

Bluetooth®  technology

Can be retrofitted with the Bluetooth®  module to allow the extractor to be controlled via the remote control on the suction hose and started automatically when a Festool cordless tool with Bluetooth®  battery pack is switched on.

Quick attachment

Tool and accessory systainers and Festool's Work Centre can be securely attached via the Sys-Dock system. Transport all your tools at once, effortlessly and efficiently.

Safe storage

The hose garage and cord holder keep the suction hose and mains cable tidily stored, eliminating tripping hazards. The locking brake and large wheels ensure complete stability.

Tech Specs
Maximum Airflow (litres per minute)
3,900 l/min
Maximum Vacuum (Pa)
24,000 Pa
Filter Surface Area (cm2)
6,318 cm2
Container/Filter Bag Capacity (litres)
36 L / 34 L
Power Consumption (W or kW)
350 W - 1,200 W
Auto Clean Function (Yes/No)
No
Dust Approval Rating
Dust Class M - medium risk dust such as mineral and wood dust
Mains Cable
Rubber Insulated
Mains Cable Length (m)
7.5 m
Maximum Wattage of Connected Tool (W)
1200w
Dimensions - L x W x H (mm)
630 mm x 365 mm x 596 mm
Weight (kg)
14.4 kg
FAQ
Customer Questions
Working with respirable Crystalline Silica (RCS) Dust
Many Festool users ask what the are the requirements for dust extractors when working with Respirabl...
Does the Bluetooth still work while a corded tool is connected to a dust extractor?
The Bluetooth switch still works with a Festool remote or a Festool Bluetooth battery even if ther...
Can I use the blue tooth remote control to switch on my Festool dust extractor using a competitors blue tooth battery?
Although the competitors Bluetooth battery is not compatible with Festool Bluetooth, you can use the...
Can the main filter be cleaned at all? Perhaps with another dust extractor just to pull the visible soiling off the surface of the flutes of the filter?
Best practice for a clogged filter is changeover as the dust can inpregnate into the filter folds an...
is it possible to store or transport my dust extractor on its side?
It can be transported on it side but the dust may find its way back down the inlet to the hose. A wa...
Can a Festool Dust Extractor be used with other tool brands?
Festool Dust Extractors work most effectively with Festool branded tools, however they do work with...
Does Festool offer an 18v/240V Dust Extractor?
Currently there’s no such option available in the Festool tool range. 
Is it possible to store my Dust extractor on its side for transport, rather than the wheels?
Your Dust Extractor can be transported on it side but the dust may find its way back down the inlet ...
Can I convert my L Class Dust Extractor to M Class?
No, the M Class Dust Extractor emits an audible alarm when the airflow is reduced and this is not a...
What do the letters in Festool product names mean?
What do FEQ or REBQ Plus mean?Here' some shortcut explanation: R - relaunch, new versionE - elec...
What does the 3mm and 5mm orbit relate to in the ETS 150 and ETS EC sanders?
The 3mm and 5mm indicate the orbit size or the sander. The orbit size is the size of the tiny random...
Can the cordless CTMC SYS or CTMC MIDI be used to cut small amount of concrete?
The best dust extractors for concrete are the Auto Clean Dust Extractors .Currently, Festool does no...
What diamond discs are available for the RG 130 to polish concrete?
Festool do not supply any consumables for polishing concrete.Our grinding discs, stone (green) , har...
What does the book icon with the error number 9 and 10 mean on the KA 65?
The error numbers displayed on the KA 65 are due to a fan error in your machine. The number 9 is th...
Can the RG 150 be used on walls with a counter balancer?
Yes. The RG 150 is recommended as a grinder for walls.We recommend the RG 150 for use on walls with...
Accessories & Consumables
Show All Accessories & Consumables
Write Your Own Review