CTM 26l M Class Dust Extractor

Functions

• Guarantees efficient dust and chip extraction, extremely important for sawing, sanding or routing work on site or in the workshop
• Compact and lightweight, it's clever flat filter design maximises the volume of dust that can be held while maintaining high suction power.
• Suction power is adjustable and the switch on/shut off function allows the extractor to turn on automatically when required and turn off when not.
• Approved for dust class M, and with the option of fitting air modules, Festool's CTM 26 promises healthy, dust free working conditions at every job.
•  

Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report

Test report: ESP Airborne Occupational Exposure Report

MAIN APPLICATIONS

• Workshop and on site cleaning
• Automatic operation with power tools
• Wet and dry extraction
• Work centre and Systainer transport

Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.

Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.

When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.

When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)