CTH 48l H Class Dust Extractor
The 48 litre Festool special application dust extractor is your only answer for safe, efficient hazardous dust removal. Asbestos, mould, fibrous mineral dust, lead, cadmium, nickel, zinc chromate - the carcinogenic and pathogenic dust doesn't stand a chance. With the high power suction turbine and a 99.995% degree of filtration there is no danger to health. The two layer safety filter bag prevents contact with the dust when disposing of the bag. Approved for dust class H. As an add on, the extractor can be fitted with air activated modules (for use with air tool on/off activation)or Bluetooth module for remote switching on/off of dust extractor or when working with cordless power tools.
H Class Dust Extractors are excluded from Festool’s 30 Day Money Back Guarantee.
H Class Dust Extractors come with standard 12 month warranty.
Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report
Test report: ESP Airborne Occupational Exposure Report
Main Applications
- Removal of carcinogenic and pathogenic dusts
- Workshop and on site cleaning
- Automatic operation with power and air tools
- Wet and dry extraction
Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.
Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.
When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.
When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)
Festool's CTH provides maximum safety in the case of carcinogenic and pathogenic dusts such as lead, cadmium, nickel and zinc chromate.
The two layer safety filter bag prevents contact with the harmful dust when disposing of the bag.
Super strong and yet super small, the high power turbine provides considerable higher suction power but takes up very little room.
The flat filter design allows the filter bag to unfold easily and expand to use almost 100% of its capacity. Hold more dust in a more compact extractor.
Every extractor can be fitted with add on modules to suit different requirements including air modules, power socket with continuous current and EAA module.
The large handle makes it easy to manoeuvre to CTH into place. The integrated locking brake and oversized wheels ensure stability when stationary.
-
Main Filter HEPA for CT 26/36/48$185.00 -
Wet Filter for CT 26/36/48$40.00 -
Blanking Plug 50 mm$42.50 -
CT-VA Cyclone Pre Separator$550.00
