CTH 26l H Class Dust Extractor

Hazardous dust doesn't stand a chance

CTH 26 E
Item No.
576809
In stock
Quantity in Pack:
1
Packaging:
Carton
$1,999.00
Features

The 26 litre Festool special application dust extractor is your only answer for safe, efficient hazardous dust removal. Asbestos, mould, fibrous mineral dust, lead, cadmium, nickel, zinc chromate - the carcinogenic and pathogenic dust doesn't stand a chance. With the high power suction turbine and a 99.995% degree of filtration there is no danger to health. The two layer safety filter bag prevents contact with the dust when disposing of the bag. Approved for dust class H.

H Class Dust Extractors are excluded from Festool’s 30 Day Money Back Guarantee.
H Class Dust Extractors come with standard 12 month warranty.

Main applications

  • For carcinogenic and pathogenic dust
  • Flexible and clean in the workshop and on-site thanks to compact design
  • Integral automatic electronic switch-on/shut-off for extraction from electric power tools
  • Suitable for both wet and dry extraction

Working With Hazardous Dust 

Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report

Test report: ESP Airborne Occupational Exposure Report

Important Information Regarding Circuit Breaker Electrical Standard

Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.
Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.
When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.
When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)

Safe dust removal

Festool's CTH provides maximum safety in the case of carcinogenic and pathogenic dusts such as lead, cadmium, nickel and zinc chromate.

High suction power

Super strong and yet super small, the high power turbine provides considerable higher suction power but takes up very little room.

Maximum utilisation

The flat filter design allows the filter bag to unfold easily and expand to use almost 100% of its capacity. Hold more dust in a more compact extractor.

Safety sealed

The two layer safety filter bag prevents contact with the harmful dust when disposing of the bag.

Customise for your needs

Every extractor can be fitted with add on modules to suit different requirements including air modules, power socket with continuous current and EAA module.

Antistatic Function
Dust extractors and tools with antistatic function to prevent static buildup when working.
Electronic
Speed control for adjusting to the working material.
CLEANTEC Connection System
Integrated bayonet fitting as the connecting element between the extractor and the tool.
Smooth Sleeve Hose
With a smooth exterior which allows it to slide over surfaces perfectly
FlowDetect
Health protection flow sensor which monitors a minimum air speed of 20m/sec and issues a warning if the air speed falls below that value.
Tech Specs
Maximum Airflow (litres per minute)
3900.00 l/min
Maximum Vacuum (Pa)
24000.00 Pa
Filter Surface Area (cm2)
6318.00 cm²
Container/Filter Bag Capacity (litres)
26/24 l
Power Consumption (W or kW)
350 - 1000 W
Auto Clean Function (Yes/No)
No
Dust Approval Rating
Dust Class H - high risk dust such as carcinogenic or pathogen contaminated dust
Mains Cable
Rubber Insulated
Mains Cable Length (m)
7.50 m
Dimensions - L x W x H (mm)
630 x 365 x 540 mm
Weight (kg)
13.90 kg
Includes
CTH 26 Dust Extractor
Integrated Hose Garage
Cord Holder
SYS-Dock with T-LOC Function
Tool Manual
Videos
Downloads
Write Your Own Review