Dust Extractor Hose - 36mm Diameter x 7m RFID - Extractor to 36mm Tool Connections

Functions

The D 36 x 7 m AS suction hose is made for cleaning work with CT mobile dust extractors and for Festool machines with a 36 mm connection. At seven metres it is the longest hose in the range, so a stairwell or a full room can be worked without moving the extractor. A robust, smooth outer skin over an extremely elastic inner hose keeps it sliding over the surface instead of catching, and the CLEANTEC extraction sleeve locks on with a bayonet fitting – you decide when it comes off, not chance. An RFID chip in the rotating adapter lets a compatible extractor, such as the CTM MIDI, set itself to the correct hose diameter automatically. Antistatic, and temperature-resistant to +70 °C. Not suitable for dust extractors with AUTOCLEAN.

• Seven metres of reach – work a stairwell or a full room from one position.
• Robust, smooth outer skin stops the hose catching on edges and corners.
• Extremely elastic inner hose for maximum flexibility.
• CLEANTEC extraction sleeve with bayonet fitting for a secure connection to the tool.
• RFID chip on the rotating adapter allows a compatible extractor, such as the CTM MIDI, to adjust automatically to the correct hose diameter.
• Smooth hose geometry reduces friction for a higher air flow rate and stronger extraction.
• Antistatic, with a bleeder resistance of less than 1 MΩ/m.
• Temperature-resistant to +70 °C.
• 36 mm diameter, 7 m long.
• Not suitable for dust extractors with AUTOCLEAN.

Main applications

• Cleaning construction sites, workshops, stairs and offices with a CT mobile dust extractor.
• Dust extraction for Festool machines with a 36 mm connection.
• Work across multiple levels or long runs where moving the extractor is impractical.
• With the Bluetooth® remote control fitted to the hose, switching a CLEANTEC mobile dust extractor on and off at the tool (available as an accessory).